How to set a function
To select a cooking function, press the FUNCTION +/- buttons. As you move through the functions, you'll notice the rack level recommendations change for best results.
Setting the Time
Adjusting the TIME/SLICES +/- buttons: To select a cook time, press the TIME =/- buttons. When using the Toast or Bagel function, these buttons will adjust the number of slices/bagel halves instead of the time. Time will increase in 1-minute increments under 1 hour and 5-minute increments over 1 hour. Hold the +/- buttons for 2 seconds to active faster scrolling in 5-minute increments. While cooking under 10 minutes, time will add/subtract in 60 second increments. *Time/Slice can be adjusted any time during the cooking cycle*
Setting the Temp
Adjusting the TEMP/SHADE +/- buttons: To adjust temperature, press the TEMP +/- buttons. When using the Toast or Bagel function, these buttons will adjust the shade level (1, lightest - 7, darkest) of slices/bagel halves instead of temperature. Temperature will increase in 5-degree increments. Hold the +/- buttons for 2 seconds to activate faster scrolling in 10-degree increments. *Temperature/Shade can be adjusted any time during the cooking cycle*
Can I use the sheet pan instead of the air fry basket with Air Fry function?
Yes, but crispiness results may vary.
Do I need to adjust the cook times and temperatures of traditional oven recipes?
For best results, keep an eye on your food during cooking. Refer to cook charts in the inspiration guide for more guidance on cook times and temperatures.
Do I need to add preheating time when setting a cook time?
No. The unit will automatically preheat when using Air Fry, Whole Roast, Roast, Bake and Pizza. There is no automatic preheat necessary or available when using Grill, Toast, Bagel, Reheat and Dehydrate.
Can I restore the unit to its default settings?
The oven will remember the last setting used for each function, even if you unplug it. To restore the oven's default settings for each function, press the Light and 2 LEVEL buttons simultaneously for 5 seconds.
How should the unit be cleaned after each use?
The unit should be cleaned thoroughly after every use.
Unplug the unit from the outlet and allow it to cool down before cleaning.
Empty crumb tray by sliding it out of the oven.
After every use, wipe away any food splatter on the interior walls and glass door of the unit with a soft, damp sponge.
To clean the exterior of the main unit and the control panel, wipe them clean with a damp cloth. A non-abrasive liquid cleanser or mild spray solution may be used. Apply the cleanser to the sponge, not the oven surface, before cleaning.
When using accessories, we recommend greasing them with butter or oil, or covering them with parchment paper or aluminium foil before placing food on top. DO NOT cover roast tray holes with parchment paper or aluminium foil. The air fry basket and wire racks can be put in the dishwasher, but may wear more quickly over time. DO NOT place roast tray, sheet pan, or crumb tray in dishwasher.
How should I deep clean the unit?
Unplug the unit from the outlet and allow it to cool down before cleaning.
Remove all accessories from the unit, including the crumb tray, and wash separately. Use a non-abrasive cleaning brush to more thoroughly wash the air fry basket. Accessories are hand-wash recommended. The air fry basket and wire racks can be put in the dishwasher, but may wear more quickly over time. DO NOT place roast tray, sheet pan, or crumb tray in dishwasher.
Use warm, soapy water and a soft cloth to wash the oven's interior and glass door, DO NOT use abrasive cleaners, scrubbing brushes, or chemical cleaners, as they will damage the oven. CAUTION: NEVER put the main unit in the dishwasher or immerse it in water or any other liquid.
To remove tough grease, let sheet pan and roast tray soak overnight in warm, soapy water, then wash with a nonabrasive sponge or brush.
Thoroughly dry all parts before placing them back in the oven.
How do I know what layer to put my accessory on?
Depending on the function you choose, the illuminated rack level(s) will indicate where your accessory should be placed in the unit.
Why does the unit sound like it's still running even though the power is off?
The cooling fan may continue to run even after the unit has been turned off. This is a normal function and should not be a source of concern. The cooling fan will stop after the temperature of the unit reaches below 35C.
Why does my unit display time and temperature instead of slices and shade on the pizza setting?
The user interface for the pizza setting was updated for clarity and ease of use. Correct instructions:
To select the function, press the function +/- buttons until PIZZA brightly illuminates. The default time and temperature setting will display.
Press the TIME/SLICES +/- buttons to select a cook time up to 4 hours.
Press the TEMP +/- buttons to select a temperature between 80°C and 230°C.