Wash containers, lids and blade assembly in warm, soapy water. Use a dishwashing utensil with handle to avoid direct contact with the blades. Exercise care when handling the blade assembly as the blades are sharp. Thoroughly rinse and air-dry all parts.
STUCK-ON INGREDIENTS IN THE POWER NUTRI™ BOWL
For stuck-on ingredients, such as nut butter, rinse the bowl and blade assembly under warm water. Next, fill the bowl with warm water up to the top of the Power Paddle and add 1–2 small drops of washing-up liquid. Screw on the blade assembly and press MIX. Twist the Power Paddle anti-clockwise continuously while cleaning. Then, empty contents and rinse under warm water and wipe with a dishwashing utensil, if needed.
Containers, lids and blade assembly are ONLY dishwasher safe on the top rack. Ensure the blade assembly and lid are removed from the container before placing in the dishwasher.
Unplug the unit before cleaning. Wipe motor base with a clean, damp cloth.
For cord storage, wrap cord with hook-and-loop fastener near the back of the motor base. DO NOT wrap the cord around the bottom of the base for storage. DO NOT store blended or unblended ingredients in the cup or bowl with the blade assembly attached. Use only the spout lid or storage lid when storing blended or unblended ingredients in the containers.
DO NOT stack items on top of the containers. Store any remaining attachments alongside the unit or in a cabinet where they will not be damaged or create a hazard.
RESETTING THE MOTOR THERMOSTAT
This unit features a unique safety system that prevents damage to the motor and drive system should you inadvertently overload it. If the unit is overloaded, the motor will be temporarily disabled. Should this occur, follow the reset procedure below.
- Unplug the unit from the electrical socket.
- Allow the unit to cool for approximately 15 minutes.
- Remove the blade assembly from the container. Empty the container and ensure no ingredients are jamming the blade assembly.